Fully-Automatic EPS Shape Moulding Machine
Product categories:EPS Shape Moulding Production Line
Product display:EPS shape moulding machine, EPS automatic moulding machine, EPS moulding machine, EPS Shape Machine,,EPS Machine
Product description:The machine is driven by hydraulic pressure with a fast/slow differential system to ensure the precise time for mould opening and closing in a n economized time and stable operation.
Next: Semi-Automatic EPS Shape Moulding Machine
Product details
Machine Specifications
Item |
Unit |
GPZ1412 |
GPZ1714 |
GPZ1816
|
GPZ1915 |
Standard mold size |
Mm |
1400*1200 |
1700*1400 | 1800*1600 | 1900*1500 |
Finish product size |
Mm |
1200×1000×380 |
1500×1200×380 |
1500×1200×380 |
1700x1300x380 |
Mold opening distance |
Mm |
210-1610 |
210-1610 |
210-1610 |
210-1610 |
Steam consumption |
T/T |
8-12T |
8-12T |
8-12T |
8-12T |
Steam inlet |
MM |
DN100 |
DN100 |
DN100 |
DN100 |
Cooling water inlet |
MM |
DN80 |
DN80 |
DN80 |
DN80 |
Discharge hole |
MM |
DN125 |
DN150 |
DN150 |
DN150 |
Compressed Air Pressure |
Mpa |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
0.6-0.8 |
Compressed air
consumption
|
KG/cycle |
1.4 |
1.6 |
1.8 |
1.8 |
Vacuum pump air
suction volume
|
M3/min |
4.66 |
4.66 |
4.66 |
4.66 |
Installed Power |
Kw |
17.2 |
17.2 |
20.7 |
20.7 |
Overall dimension |
Mm |
4950×2300×5350 |
4950×2650×5550 |
4950X2750X5750 |
4950X2750X5750 |
Cycle time |
SEC |
50-110 |
6-120 |
6-130 |
6-130 |
Machine Detail
Splicing structure ensurethe strong machine Guide sleeve of the main frame adopt bi-parting
structureand prevent deformation self-lubricatin ggraphite copper sleeve
and special structure desian
Adopt high strength alumi-num frame sliding door Self-adaptive moving-moldauxiliary support design
Hydraulic system Pipe System
Fully-Automatic EPS Shape Moulding Machine Introtuction:
The machine is integrated with international advanced electronic original components with PLC and a touch screen Chinese
displayer.
It works in two modes: normal feeding and pressure feeding of material , and the two models can be switched as per the structure and form of mould. It is optional for full automatic, semi-automatic an manual operating method.
The machine is driven by hydraulic pressure with a fast/slow differential system to ensure the precise time for mould opening and closing in a n economized time and stable operation.
Various of heating methods can be optionally used as per the product form so as to ensure the product quality. A vacuum and negative pressure system can ensure a low water content, rapid shaping, and short drying period (or without drying).

